HP e-CommerceXML Accelerator sa7150 - Manual (Page 123)

Remote Management
Overview
The SA7150 supports remote management via three protocols:
• Telnet
• Secure Shell (SSH)
• SNMP
NOTE: Remote
management functions
can be enabled and
configured only through
the local serial console. When enabled, remote management allows you to access the device’s
Command Line Interface (CLI) from Telnet or SSH sessions running
on remotely located machines. Up to five remote sessions can be
configured, including both Telnet and SSH sessions. Before you can
use the device’s remote management function, you must enable and
configure it at the local serial console. Remote management requires
that the device’s network interface be assigned an IP address.
Remote SNMP management is supported to the extent of allowing
control of the System group of MIB-II.