HP e-CommerceXML Accelerator sa7150 - Manual (Page 132)

C H A P T E R 6 HP e-Commerce/XML Server Accelerator SA7150 User Guide
122
Starting SNMP SNMP is enabled or disabled using the CLI’s setsmnp snmp
command (it is disabled by default):
HP SA7150> setsnmp snmp enable
With no community string defined, the device will not respond to
SNMP queries (even with SNMP enabled). Because there is no
default community string, the user must set the community string as
well as enable the SNMP function.
HP SA7150> setsnmp snmp_community
SNMP Community String(s) Setting.
Enter a SNMP Community IP (q to quit):
1.1.1.2
Enter a SNMP Community String (q to quit):
cstring
Enter a SNMP Community IP (q to quit): q
HP SA7150>
Standards
Compliance The SA7150’s SNMP agent is bilingual and can support both
SNMPv1 and SNMPv2c requests. HP private enterprise MIB files are
compliant with SMIv2 as specified in RFC 1902. SET operations are
not allowed for any HP private MIB objects for the SA7150, although
you can change MIB variable values with commands issued on the
CLI.