HP e-CommerceXML Accelerator sa7150 - Manual (Page 165)

A P P E N D I X A Front Panel LEDs
155
Overload ON – SA7150 is saturated with SSL
requests. LED ranges from dim
flickering to bright steady, indicating
low to high spillover. Refer to the
spill command for ways to offload
requests to another SA7150.
OFF – Normal operation.
Activity ON – SSL processing is being
performed. Ranges from dim, when
processing loads are low to bright,
when greater amounts of processing
are occurring.
OFF – No SSL processing is being
performed.
Network Link ON – Operational network
connection.
OFF – No operational network
connection.
Inline
(See Appendix B, Failure/
Bypass Modes)
BLINKING GREEN – Fail-safe
mode, which is the default. In the
event of a SA7150 failure, traffic
will not pass through.
STEADY GREEN – Fail-through
mode, which allows traffic to pass
even with SA7150 failure.
OFF – SA7150 is not operational, or
is in Bypass mode.
Server Link ON – Operational server connection.
OFF – No operational server
connection.
LED Status