HP e-CommerceXML Accelerator sa7150 - Manual (Page 101)

C H A P T E R 5 Command Reference
91
Operational
Commands
list maps List all mappings. (Same as show map.)
Example:
HP SA7150> list maps
Map Net Ser Cipher Re- Client well
ID KeyID Server IP Port Port Suites direct Auth XML form
== ===== ========= ===== ==== ====== ===== ===== === ====
1 default Any 443 80 all(v2+v3) n n n N/A
2 sample 10.1.2.57 443 80 med(v2+v3) n n n N/A
Command Definition
Command Description
bypass
WARNING: Do not issue
the bypass command from a
remote management session
(Telnet or SSH). Doing so
will result in an immediate
disconnect from the
SA7150.
Enables bypass mode, in which traffic flows through SA7150
without being processed. See Failure/Bypass Modes in Appendix
B for details. See the inline command below for reversing bypass.
Example:
HP SA7150> bypass
The LED labeled “inline” on the SA7150’s front panel turns off
when bypass is enabled.
NOTE: The SA7150 can be placed in bypass mode simultaneously
with the bypass switch and the CLI’s bypass command. When this
occurs, you must use both the bypass switch and the CLI’s insert
command to return the unit to inline mode.