HP e-CommerceXML Accelerator sa7150 - Manual (Page 112)

C H A P T E R 5 HP e-Commerce/XML Server Accelerator SA7150 User Guide
102
set utl_lowwater Set the Utilization Threshold Alarm low-water value. Expressed as
a percentage, the low-water value represents the lowest CPU
utilization, Connections per Second, or Total Open Connections
required to trigger a UTL Alarm. (Range: 1-99%, default: 60%)
NOTE: See also set utl_window and set utl_highwater, this
section.
Syntax:
HP SA7150> set utl_lowwater <%>
where <%> is the percentage defining the lower threshold of CPU
utilization, Connections per Second, or Total Open Connections
required to trigger a Utilization Threshold Alarm.
show utl_window Display the current Utilization Threshold Alarm window.
Example:
HP SA7150> show utl_window
Utilization Window set [secs]: 10.
show utl_highwater Display the Utilization Threshold Alarm’s current upper threshold.
Example:
HP SA7150> show utl_highwater
Utilization High water mark [%]: 80
show utl_lowwater Display the Utilization Threshold Alarm’s current lower threshold.
Example:
HP SA7150> show utl_lowwater
Utilization Low water mark [%]: 60
set ovl_window Set interval (window) at which the device checks for overloads
resulting in the device executing a spill or throttle and, if any are
detected, issues an Overload Alarm. (Range: 5-65000, default: 15)
Example:
HP SA7150> set ovl_window 10
Command Description