HP e-CommerceXML Accelerator sa7150 - Manual (Page 110)

C H A P T E R 5 HP e-Commerce/XML Server Accelerator SA7150 User Guide
100
Alarms and
Monitoring
Commands
Command Description
set alarms Enable all or a selection of the SA7150’s alarms.
Syntax:
HP SA7150> set alarms
utl>
where
enables all five of the SA7150’s alarms
enables the Encryption Status Change Alarm
enables the Network Link Status Alarm
disables all alarms
enables the Overload Alarm
enables the Refused SSL Connection Alarm
enables the Utilization Threshold Alarm
Example:
HP SA7150> set alarms all
HP SA7150> show alarms
Alarms set: esc rsc utl ovl nls
show alarms Display the list of currently enabled alarms.
Example:
HP SA7150> set alarms none
HP SA7150> show alarms
Alarms set:
NOTE: When no alarms are set (i.e., when none is specified in set
alarms), the display shows an empty field.
set rsc_window Set interval (window) at which the device checks for refused SSL
connections and, if any are detected, issues an RSC Alarm.
(Range: 5-65000 seconds, default: 15)
Syntax:
HP SA7150> set rsc_window
where is the number of seconds of the desired interval.