HP e-CommerceXML Accelerator sa7150 - Manual (Page 143)

C H A P T E R 7 Alarm Types
133
Alarm Types
The configurable alarm types are detailed in separate sections below.
ESC:
Encryption
Status Change
Alarm When enabled, an alarm is issued when the device is changed
between INLINE and BYPASS modes. This change can be made
from CLI using the commands, inline or bypass, or at the device’s
front panel by pressing the BYPASS button.
Format:
A:mm/dd/yyyy hh:mm:ss:
ESC:HDWR|CONB|CONI|FNTB|
FNTI|APPR:/*message*/
Where:
A: identifies the message as an alarm.
mm/dd/yyyy hh:mm:ss: is the timestamp.
ESC: identifies the message as an Encryption
Status Change Alarm.
Alarm Modifiers and Messages
HDWR: indicates crypto card failure
CONB: indicates console-controlled bypass
CONI: indicates console-controlled inline
FNTB: indicates front panel-controlled
bypass
FNTI: indicates front panel-controlled
inline
APPR: indicates application restart