HP e-CommerceXML Accelerator sa7150 - Manual (Page 157)

C H A P T E R 8 Using HyperTerminal*
147
Command: import patch
Use the SA7150’s aux console port, which defaults to 115.2 kbps, for
greater speed. The import procedure (using xmodem) requires
approximately 7 minutes at 115.2 kbps.
1. Download the patch file (.patch) to the local PC.
2. Connect the serial cable from COM1 or COM2 to the SA7150
aux console.
3. Log in to the SA7150.
4. Type the import patch command and press Enter.
HP SA7150> import patch
Import protocol: (xmodem) [xmodem]:
Start xmodem upload now
Use Ctl-X to cancel upload
5. In HyperTerminal*, click Send File from the Transfer menu,
select the file (you can type the filename or click the Browse
button to find the file), click to select the transfer protocol (1K
xmodem), and click Send.
Verifying patch image...
Patch successfully imported.
The patch becomes effective upon the next system reboot. Should a
patch fail upon import, the last successfully imported patch is
reapplied.