HP Integrity NonStop H-Series - Manual (Page 94)

Error! No text of specified style in document.
WVP Event Analyzer Plug-in User Guide V01 – 536989-001
- 94 -
Hourly Threshold should be an integer 0 or higher
Cause: The hourly threshold value is entered in an invalid format.
Recovery: Enter the hourly threshold value in the correct format (integer in the range 1 through 9999).
Daily Threshold should be an integer 0 or higher
Cause: The daily threshold value is entered in an invalid format.
Recovery: Enter the daily threshold value in the correct format (integer in the range 1 through 9999).
Daily Threshold cannot be less than the Hourly Threshold
Cause: The daily threshold value entered is less than the hourly threshold value.
Recovery: Enter a daily threshold that is equal to or greater than the daily threshold.
No weekdays selected
Cause: The weekdays to ‘Enforce’ the alert on are not checked.
Recovery: Check at least one weekday to enforce the alert on.
Start Hour cannot be greater than or equal to the End Hour
Cause: The start hour chosen from the drop down is greater than or equal to the end hour.
Recovery: Make sure the start hour is less than the end hour.
WVP Event # cannot be left blank
Cause: The event # text field is empty.
Recovery: Choose a valid event # (integer lying between 500 and 700) and enter it in the text field.
WVP Event # should be an integer lying between 500 and 700
Cause: The event # chosen is in the wrong format or outside the valid range.
Recovery: Choose a valid event # (integer lying between 500 and 700) and enter it in the text field.
Optional Text can contain alphabets, numbers, and the characters open bracket [(], close
bracket [)], hyphen [-] & period [.] only
Cause: The optional text field contains invalid characters.
Recovery: Choose a valid text field value (contain alphabets, numbers, and the characters open
bracket [(], close bracket [)], hyphen [-] & period [.] only)
Alert for the chosen Owner-Subsystem Exists Already!
Cause: An alert definition for the owner-subsystem being added exists already.
Recovery: Either cancel the addition or add the alert for another owner-subsystem.