Disable alertmail, Disable dhcpv6, Disable enclosure_ilo_federation_support – HP Onboard Administrator User Manual
Page 81
Enclosure network configuration commands 81
OA Administrator
OA Bays
•
Restrictions:
o
All servers in the enclosure should be powered off before clearing the VCMODE.
o
The enclosure will no longer be managed by Virtual Connect, and servers will revert to default
Ethernet MAC and Fibre Channel WWN assignments. Virtual Connect might disconnect the servers
from Ethernet networks and Fibre Channel fabrics.
DISABLE ALERTMAIL
•
Command:
DISABLE ALERTMAIL
•
Description:
Disables the sending of emails when events occur
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None
DISABLE DHCPV6
•
Command:
DISABLE DHCPV6
•
Description:
Disable DHCPv6 mode for management interfaces of all devices in the enclosure. With DHCPv6
disabled, the IPv6 and DNS addresses are not obtained from the DHCPv6 Server. This setting takes
effect immediately.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None
DISABLE ENCLOSURE_ILO_FEDERATION_SUPPORT
•
Command:
DISABLE ENCLOSURE_ILO_FEDERATION_SUPPORT
•
Description:
Disables the Onboard Administrator support required to allow peer-to-peer network communication
necessary for iLO Federation among suitably capable iLOs within the enclosure. To enable, this
support, see the ENABLE ENCLOSURE_ILO_FEDERATION_SUPPORT (on page
) command.
•
Access level/Bay level: