HP Onboard Administrator - Manual (Page 203)

Enclosure Dynamic Power Cap commands 203
If you have previously specified bays to exclude, using this command again replaces that specification
rather than augmenting it.
• Access level/Bay level:
OA administrator, OA operator
• Restriction:
You can exclude no more than one fourth of the bays.
SHOW ENCLOSURE POWER_CAP
• Command:
SHOW ENCLOSURE POWER_CAP
• Description:
Displays the current Enclosure Dynamic Power Cap in watts.
• Access level/Bay level:
All
• Restriction:
None
• Example:
OA-0018FE27577> SHOW ENCLOSURE POWER_CAP
Enclosure Dynamic Power Cap: Disabled
Derated Circuit Capacity: Disabled
Rated Circuit Capacity: Disabled
Allowable Enclosure Dynamic Power Cap: 3123 - 7676 Watts AC
Allowable Derated Circuit Capacity: 3123 - 7676 Watts AC
Allowable Rated Circuit Capacity: 3428 - 7676 Watts AC
SHOW ENCLOSURE
POWER_CAP_BAYS_TO_EXCLUDE
• Command:
SHOW ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE
• Description:
Displays the bays in the enclosure that are exempt from the Enclosure Dynamic Power Cap.
• Access level/Bay level:
All
• Restriction:
None
• Example:
OA-0018FE27577F> show enclosure power_cap_bays_to_exclude
Bays opted out: None