Show snmp, Show snmp user – HP Onboard Administrator User Manual
Page 108
Enclosure network configuration commands 108
SHOW SNMP
•
Command:
SHOW SNMP
•
Description:
Displays the SNMP configuration, including:
o
SNMP system name
o
Location
o
Contact
o
Read community name
o
Write community name
o
Engine ID
o
List of the trap destinations
•
Access level/Bay level:
All
•
Restrictions:
None
•
Example:
OA> SHOW SNMP
SNMP Configuration:
Status: Enabled
System Name: USE818AMMS
System Location: bottom rack1
System Contact: admin@localhost
Read Community Name: public
Write Community Name: private
Engine ID: 0x8000000b0466697665
Trap Receiver host: 16.84.189.215 public
localhost private
16.84.189.215 bob authPriv v3
SHOW SNMP USER
•
Command:
SHOW SNMP USER {LIST |"
•
Description:
Displays the current information regarding SNMPv3 users. If LIST is specified, the list of current users
is displayed. If a user name is specified, information regarding that user is displayed.
•
Access level/Bay level:
All
•
Restrictions:
None