HP Onboard Administrator - Manual (Page 142)

Enclosure Firmware Management commands 142
SET FIRMWARE MANAGEMENT { URL | POLICY | POWER | SCHEDULE | BAYS_TO_INCLUDE
| FORCE DOWNGRADE }
• Description:
Configures various enclosure firmware management settings
• Access level/Bay level:
OA administrator
• Restrictions:
None
SET FIRMWARE MANAGEMENT URL
• Command:
SET FIRMWARE MANAGEMENT URL { DVD | | NONE }
• Description:
Sets the location on the management network of the HP Firmware ISO image. Supported protocols are
HTTP, USB, and DVD. Format the URL as: protocol://host/path/filename. The URL syntax for
IPv6 addresses is protocol://[]/path/filename. If Enclosure Firmware
Management is disabled, NONE clears the location of the HP Firmware ISO image.
• Access level/Bay level:
OA administrator
• Restrictions:
If the image is being used, the URL cannot be changed.
SET FIRMWARE MANAGEMENT POLICY
• Command:
SET FIRMWARE MANAGEMENT POLICY { MANUAL | AUTO DISCOVER | AUTO UPDATE }
• Description:
Sets the Enclosure Firmware Management policy for the enclosure. To update and discover manually,
use the MANUAL option. To automatically discover server firmware on insertion, use the AUTO
DISCOVER option. To automatically update server firmware on insertion, use the AUTO UPDATE option.
• Access level/Bay level:
OA administrator
• Restrictions:
None
SET FIRMWARE MANAGEMENT POWER
• Command:
SET FIRMWARE MANAGEMENT POWER { OFF| POWEROFF | FORCE }
• Description:
Sets the Enclosure Firmware Management power control policy for the enclosure.