HP Onboard Administrator - Manual (Page 43)

Directory commands 43
o Must be 0 to 58 characters in length.
o Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces.
o If the group name or description field contains spaces or zero characters, use double quotes.
SET LDAP NAME MAP
• Command:
SET LDAP NAME MAP {ON|OFF}
• Description:
Turns on NT name mapping to enable the user to enter their NT domain\username
• Access level/Bay level:
OA administrator
• Restrictions:
None
SET LDAP GCPORT
• Command:
SET LDAP GCPORT { | NONE }
• Description:
Sets the TCP port number of the LDAP Global Catalog SSL service. Port 3269 is the standard value.
• Access level/Bay level:
OA administrator
• Restrictions:
The valid port number range is 1 to 65535.
SET LDAP PORT
• Command:
SET LDAP PORT { | NONE }
• Description:
Sets the TCP port number of the LDAP SSL service. Port 636 is the standard value.
• Access level/Bay level:
OA administrator
• Restrictions:
The valid port number range is 1 to 65535
SET LDAP SEARCH
• Command: