HP Onboard Administrator User Manual
Page 172
Interconnect management commands 172
—
Product name
—
Product part number
—
Product version
—
Product serial number
—
Asset tag
—
VLAN ID
o
INTERCONNECT STATUS displays status information, UID state, and health state for the specified
interconnects.
o
INTERCONNECT PORT MAP displays port mapping information for the specified interconnects.
o
INTERCONNECT SESSIONS shows which users, if any, have serial console sessions in progress for
each interconnect.
o
INTERCONNECT POWERDELAY shows the status and delay times for the specified interconnects.
o
See also the SHOW INTERCONNECT INFO (on page
) and SHOW INTERCONNECT LIST (on
) commands.
•
Access level/Bay level:
All
Bay specific
•
Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
•
Example:
OA-0018FE27577F> show interconnect info 1
show interconnect info all
1. Ethernet
Product Name: HP VC FlexFabric 10Gb/24-Port Module
Width: Single
URL to Management interface: http://172.16.1.70/
In-Band IPv4 Address: 172.16.1.70
User Assigned Name:
Part Number: 571956-B21
Spare Part Number: [Unknown]
Serial Number: TW29460027
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Present
Internal Serial Route to OA: Enabled
Serial Port Baud Rate: 115200
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: HP
Firmware Version: 4.10