HP Onboard Administrator - Manual (Page 25)

User account commands 25
User account commands
ADD USER
• Command:
ADD USER "" [""]
• Description:
Adds a user to the system. If you do not provide a password, you are prompted for one. If SCRIPT
MODE is enabled and the password is not provided, the password is assigned an unmatched string.
This unmatched string requires an enclosure administrator to change the password to allow the new
user to access the system.
• Access level/Bay level:
OA administrator
• Restrictions:
o You can add a maximum of 30 users, including the reserved accounts.
o The is case sensitive and must be unique to all other user names and group names. The
must be 1 to 40 characters long and can include all alphanumeric characters, the
dash, and the underscore.
o The must begin with a letter.
o The must be three to eight characters long for firmware 1.00 through 1.30 and 3 to 40
characters long for firmware 2.00 and later. The character set includes all printable characters. If
you do not enter a password, you are prompted to enter one.
o Reserved user names are: ALL (case insensitive) ADMINISTRATOR (case insensitive), switch1,
switch2, switch3, switch4, switch5, switch6, switch7, switch8, ldapuser, and nobody.
ASSIGN
• Command:
• ASSIGN {SERVER | INTERCONNECT} { | ALL | -
number>} {"" | LDAP GROUP ""} *OR* ASSIGN OA
{"" | LDAP GROUP ""}
Assigns one or more bays to a user or group
• Access level/Bay level:
OA administrator
• Restrictions:
The is case sensitive. If a bay is presently assigned to a user, you must unassign the bay
first.