HP Onboard Administrator - Manual (Page 60)

Enclosure Bay IP Addressing commands 60
Enclosure Bay IP Addressing commands
ADD EBIPA
• Command:
ADD EBIPA {SERVER | INTERCONNECT} DNS [{ , | - } ]
• Description:
Adds a DNS server IP address to the list of DNS servers for either SERVER bays or INTERCONNECT
bays
• Access Level/Bay level:
Administrator, Operator
• Restrictions:
o A maximum of three DNS servers can be added for EBIPA.
o The must be in the form ###.###.###.###, where each ### ranges from 0 to 255.
ADD EBIPAV6
• Command:
ADD EBIPAV6 { SERVER | INTERCONNECT } DNS [ ALL |
[{ , | - } ] ]
• Description:
Adds an EBIPA DNS server IPv6 address to the list of DNS servers for either server bays or interconnect
bays.
• Access Level/Bay level:
OA administrator, OA operator
• Restrictions:
o A maximum of three IPv6 DNS servers can be added for EBIPA.
o A bay number or bay range may be specified. If no bay number or bay range is specified, the IPv6
DNS server is added to all servers or interconnects.
o The must be in the form ####:####:####:####:####:####:####:####/###,
where #### ranges from 0 to FFFF. A compressed version of the same IPv6 address is also
supported.
DISABLE EBIPAV6
• Command:
DISABLE EBIPAV6 { SERVER | INTERCONNECT } [ ALL | [{ , | - }
] ]