HP Onboard Administrator - Manual (Page 187)

USB support commands 187
You cannot use the FORCE option for downgrade in FIPS Mode ON/DEBUG.
CAUTION: When a firmware upgrade is in process, do not disconnect the Onboard
Administrator modules. Disconnecting these modules could render the Onboard Administrator
unusable.
UPLOAD CONFIG using USB key
• Command:
UPLOAD CONFIG {"" | USB ""}
• Description:
o Uploads to the specified URL a script that duplicates the current runtime configuration.
o Supported protocols are FTP, TFTP, and USB.
o Format the URL as follows: protocol://host/path/file.
o The URL syntax for IPv4 addresses is protocol:///path/file.
o The URL syntax for IPv6 addresses is protocol://[]/path/file.
o If your FTP server does not support anonymous connections, you can specify a user name and
password in the format ftp://username:password@host/path/file.
o To save an Onboard Administrator configuration file to a USB key, use the USB keyword and
provide a file name.
• Access level/Bay level:
OA administrator
• Restriction:
The user password is not saved or restored by the UPLOAD CONFIG command.