HP Onboard Administrator - Manual (Page 191)

VLAN commands 191
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
SET VLAN IPCONFIG DHCP
• Command:
SET VLAN IPCONFIG DHCP []
• Description:
Temporarily sets the OA to DHCP mode and the specified VLAN ID (0 to 4094). Setting the VLAN ID
number to 0 disables enclosure VLAN. Any other setting enables enclosure VLAN.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
VLAN ID must be an integer between 0 and 4094.
SET VLAN IPCONFIG SAVE
• Command:
SET VLAN IPCONFIG SAVE
• Description:
Saves the VLAN IPCONFIG changes to FLASH.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
SET VLAN IPCONFIG STATIC
• Command:
SET VLAN IPCONFIG STATIC [] []
• Description:
Temporarily sets the OA to static IP mode and the specified VLAN ID (0 to 4094). Setting the VLAN ID
number to 0 disables enclosure VLAN. Any other setting enables the enclosure VLAN.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
VLAN ID must be an integer between 0 and 4094.