HP Onboard Administrator - Manual (Page 171)

Interconnect management commands 171
• Restrictions:
You must have access to the specified bay number.
SET INTERCONNECT POWERDELAY
• Command:
SET INTERCONNECT POWERDELAY {ALL | [{ - | , } ]}
{number of seconds to delay power | NOPOWERON}
• Description:
Sets the PowerDelay status for the specified interconnect or range of interconnects. If the delay is zero,
the delay has no effect on the device. If the delay is NOPOWERON, the device cannot power on until
all devices have completed their delays.
• Access level/Bay level:
Administrator
Bay specific
• Restrictions:
You must have access to the specified bay number.
SET INTERCONNECT UID
• Command:
SET INTERCONNECT UID {ALL | [{ , | - } ]} {ON | OFF}
• Description:
Turns an interconnect UID on or off
• Access level/Bay level:
All
Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
SHOW INTERCONNECT
• Command:
SHOW INTERCONNECT {INFO | LIST [IPV6] | PORT MAP | POWERDELAY | SESSIONS |
STATUS} [ALL | | -]
• Description:
o Displays the following information, depending on the keyword specified:
— Interconnect type
— IPv4 information
— IPv6 information
— Manufacturer name