HP Onboard Administrator - Manual (Page 102)

Enclosure network configuration commands 102
• Example:
OA> set snmp engineid testid
SNMP engine id set to "0x8000000b04746573746964"
SET SNMP CONTACT
• Command:
SET SNMP CONTACT ""
• Description:
Configures the name of the system contact. The default contact is blank.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
o The must be no more than 20 characters long.
o Any printable character is acceptable. If includes spaces or hash signs, include it
within double quotes.
SET SNMP LOCATION
• Command:
SET SNMP LOCATION ""
• Description:
Configures the SNMP location of the enclosure. The default location is blank.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
o The must be no more than 20 characters long.
o Any printable character is acceptable. If includes spaces or hash signs, include it
within double quotes.
SHOW FIPS MODE
• Command:
SHOW FIPS MODE
• Description:
Displays the FIPS Mode setting.
• Access level/Bay level:
OA administrator, OA user
• Restrictions: