HP Onboard Administrator - Manual (Page 186)

USB support commands 186
• Description:
Displays a list of Firmware images, configuration scripts, and ISO images present on the enclosure USB
media
• Access level/Bay level:
OA administrator, OA operator
• Restriction:
None
• Example:
OA-00215AB195CB> show usbkey
Firmware Image Files Image Version
--------------------------------------- -------------
usb://d1/hpoa225.bin 2.25
Configuration Script Files
---------------------------------------
usb://d1/USE62317RY.cfg
ISO Image Files
---------------------------------------
usb://d1/win2003sp4.iso
usb://d1/BB130.2008_0822.11.iso
usb://d1/HPSUMForce.iso
usb://d1/FW820.2008_0730.61.iso
UPDATE IMAGE using USB key
• Command:
UPDATE IMAGE {{[FORCE] { | FW_ISO}} | SYNC}
• Description:
o The UPDATE IMAGE command downloads a new flash image from the network and uses it to
update the Onboard Administrator firmware. If a redundant Onboard Administrator is present in
the system, then this command flashes and validates its firmware before attempting to flash the
active Onboard Administrator.
o Supported protocols are HTTP, FTP, and TFTP.
o The URL must be formatted as: protocol://host/path/filename.
o The URL syntax for IPv6 addresses is protocol://[]/path/file.
o If your FTP server does not support anonymous logins, a user name and password can be specified
within the URL formatted as: ftp://username:password@host/path/filename.
o Use FORCE to enable downgrading firmware even if settings and passwords might be lost.
o The UPDATE IMAGE SYNC command initiates a firmware sync of the Active and Standby Onboard
Administrators.
o For USB protocol, see the SHOW USBKEY (on page 185 ) command.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions: