HP Onboard Administrator - Manual (Page 100)

Enclosure network configuration commands 100
SET OA NAME
• Command:
SET OA NAME [ | ACTIVE | STANDBY] ""
• Description:
Sets the Onboard Administrator name. If a bay number is not specified, the command defaults to the
active Onboard Administrator.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
The Onboard Administrator name is 1 to 32 characters long including all alphanumeric characters and
the dash (-).
SET OA UID
• Command:
SET OA UID [ | ACTIVE | STANDBY] {ON | OFF}
• Description:
Sets the Onboard Administrator UID on or off.
If you do not specify a bay number, the command defaults to the active Onboard Administrator.
• Access level/Bay level:
All
• Restrictions:
None
SET SECURESH SERVER KEX DHG1
• Command:
SET SECURESH SERVER KEX DHG1 [ ENABLE | DISABLE ]
• Description:
Enables insecure diffie-hellman-group1-sha1 key exchange on the Onboard Administrator's SSH
server.
• Access level/Bay level:
OA administrator
• Restrictions:
The default is disabled on Onboard Administrator 4.01 and later. Enable only if compatibility with
older client applications is required.
SET SERIAL BAUD
• Command: