HP Onboard Administrator - Manual (Page 133)

Enclosure management commands 133
Name: OA-0018FE27577F
Role: Active
UID: Off
Status: OK
Diagnostic Status:
Internal Data OK
Firmware Mismatch OK
OA Battery OK
SHOW OA UPTIME
• Command:
SHOW OA UPTIME [ALL | [{ , | - } ] | ACTIVE | STANDBY]]
• Description:
Displays uptime for the Onboard Administrator. If you do not specify the Onboard Administrator, the
command defaults to the Active Onboard Administrator.
• Access level/Bay level:
All
• Restrictions:
None
• Example:
OA-0018FE27577F> SHOW OA UPTIME
active all standby
OA-0018FE27577F> SHOW OA UPTIME ACTIVE
Onboard Administrator #1:
Role: Active
Uptime: 0 days, 0 hours, 43 min
CPU Load: 0.00, 0.02, 0.06
SHOW OA USB
• Command:
SHOW OA USB
• Description:
o Displays which USB controller is currently enabled.
o The FRONT controller enables the internal DVD drive and the front USB connector.
o The BACK controller enables the two USB ports on the near KVM Option Module.
o This command has no effect on HP c3000 Onboard Administrator boards that are hardware
revision level C0 and later. Hardware revision is found using the SHOW OA INFO command.
• Access level/Bay level:
All
• Restrictions:
None
• Example:
OA-0018FE27577F> SHOW OA USB