HP Onboard Administrator - Manual (Page 16)

Command line 16
• TEST
Because these words indicate specific functions within the Onboard Administrator firmware, they are only
allowed where explicitly defined in the help documentation for a command. Attempts to use reserved words
in a command where not allowed results in an Invalid Arguments error.
A local user account cannot be created by using these reserved words.
HP Integrity server blade restrictions
HP Integrity server blades do not support all commands. See specific commands for restrictions on HP
Integrity server blades.
The following commands are not applicable to HP Integrity server blades
• Hponcfg
• Set Server Boot
• Set Server Boot Once
• Show Server Boot
• Show Syslog Server
• Update iLO
Access level and privileges
Onboard Administrator accounts are created with a username, password, privilege level, and permissions to
Device bays and Interconnect bays on the Onboard Administrator. You cannot delete or modify the
privileges of the default Administrator account on the Onboard Administrator. You can only change the
password for the Administrator account. The following table indicates the capabilities of the user based on
their privileges and permitted bays.
Account classification Capabilities Account name /
Privilege level Bays selected for this
account
Administrator • All commands
• Local account, not
LDAP
• Only account
remaining after a
reset Onboard
Administrator to
factory defaults
(account retains
configured
Administrator
password)
• Administrator
account password
can be reset to
factory default
through the Onboard
Administrator serial
port using L lost
Administrator /
administrator
All