HP 3PAR Operating System Software - Manual (Page 454)

3PAR InForm Management Console 4.1.0 User’s Guide
454 320-200231 Rev A
Viewing the Cage Subsystems SFPs Tab
The Cage Subsystems SFPs tab displays information about the system's SFPs.
To access the Cage Subsystems SFPs tab, click the SFPs tab after accessing the Cage
Subsystem tab .
Note: In the screen output above, the SFPs tab has been accessed from the
InServs node (all connected storage server) level on the Management Tree. If
the SFPs tab was accessed from the Management Tree via a specific server
node (for example, s424), the resulting information displayed on the SFPs
tab does not display the System column.
The Cage Subsystems SFPs tab displays the following information:
Column Description
System The InServ Storage Server name.
Cage Name The drive cage in which the SFP resides.
Name The SFP name in node:slot format.
Manufacturer The manufacturer of the SFP.
Model/Part Number The model and/or part number of the SFP.
Serial Number The SFP serial number.
Max Rate The SFP's maximum speed, in Gbps.