HP 3PAR Operating System Software - Manual (Page 302)

3PAR InForm Management Console 4.1.0 User’s Guide
302 320-200231 Rev A
Removing VLUNs
To remove a VLUN:
1. Access the VLUNs screen.
2. Right-click the VLUN you wish to remove.
Note: If you wish to remove multiple VLUNs (see Selecting Multiple Items ),
select the VLUNs you wish to remove before right-clicking.
3. In the menu that appears, click Remove.
The Remove VLUN(s) dialog box appears.
4. (Optional) In the Removal VLUN(s) dialog box that appears, click the After
removal... checKiBox to prevent the storage server from issuing a Loop Initialization
Primitive (LIP) or Registered State Change notification (RSCN) after removing the
VLUN.
5. Click OK.
See also:
Viewing VLUNs
Selecting Multiple Items
Working with Templates
The InForm Management Console allows you to create templates that enable you to apply a
set of parameters again and again to create virtual volumes or Common Provisioning
Groups (CPGs) with the same, or similar characteristics.
The following general rules apply to templates:
A property can either be included in a template or not included (unincluded). Properties
are Virtual Volume (VV) or Common Provisioning Group (CPG) attributes such as set size.
A property included in a template can have a defined value or have a value that is left
unspecified. A property with a defined value has had a specific value assigned to it (for
example, a set size of 2). A property with an unspecified value does not have a specific
value assigned to it. When you apply a template that includes a property with one ore