HP 3PAR Operating System Software - Manual (Page 215)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 215
Adding Hosts to Host Sets
Hosts can be added to existing host sets.
To add a host or multiple hosts to an existing host set, access the Add to Host Set dialog
box:
1. Click Hosts in the Manager Pane.
2. In the Management Tree, click Hosts under the system where the host(s) resides.
3. Click the Hosts tab in the Hosts screen.
4. Select the host(s) you wish to add.
5. Right-click and then click Add to Host Set in the menu that appears.
The Add to Host Set dialog box appears.
6. Select a host set from the host set list.
7. Click OK.
See also:
Manager Pane
Management Tree
Common Actions Panel
Viewing Host Information
Selecting Multiple Items
Working with Host Sets
Exporting Virtual Volumes
To export a virtual volume, access the Export Virtual Volume wizard:
1. Click Hosts or Provisioning in the Manager Pane.
2. If you are working in the Hosts manager, in the Common Actions panel, click Export
Volume.
3. If you are working in the Provisioning manager:
a. Access the Virtual Volumes tab.
b. Right-click the volume you wish to exort.
c. In the menu that appears, click Export.
The Export Virtual Volume wizard appears.