HP 3PAR Operating System Software - Manual (Page 348)

3PAR InForm Management Console 4.1.0 User’s Guide
348 320-200231 Rev A
The following information is displayed in the upper pane:
Column Description
Position The location of the port in node:slot:port format.
WWN/MAC
The World Wide Name (WWN) or Media Access Control (MAC) address
of the connected device.
State The state of the port. See System and Component Status Icons .
Type
The type of port, either Remote Copy over IP (RCIP) or Remote Copy
over Fibre Channel (RCFC).
Connected
Device Type
Type of device that the port is connected to. Free, Disk, Host, or
InServ.
Connected
Device
Name of device that the port is connected to, e.g. host1, cage0.
Mode
Port firmware mode setting. Ports in Initiator mode are connected to
drive cages and ports in Target mode export to hosts. Suspended
mode is for target ports that have not yet been initialized by the
system (rare). Peer mode is for Ethernet ports.
For information about the lower pane, see
RCIP_Tab and RCFC_Tab .