HP 3PAR Operating System Software - Manual (Page 148)

3PAR InForm Management Console 4.1.0 User’s Guide
148 320-200231 Rev A
iSCSI Port Summary
The iSCSI port summary is displayed on the Summary tab.
The following information is provided:
Group Field Description
General
Position Port location.
Type Indicates whether the port is FC, iSCSI, RCIP, or RCFC.
Rate
Rate that data can be transferred over the port (1 Gbps,
2 Gbps or 4 Gbps). When there is no specified value, no
connection exists.
Connected
Device Type Type of device that the port is connected to. Free, Disk,
Host, or InServ.
Connected
Device Name of device that the port is connected to, e.g. host1,
cage0.
Mode
Port firmware mode setting. Ports in Initiator mode are
connected to drive cages and ports in Target mode export
to hosts. Suspended mode is for target ports that have
not yet been initialized by the system (rare). Peer mode is
for Ethernet ports.
State Current state of the port.