Configuring a remote copy over fibre channel port – HP 3PAR Operating System Software User Manual

Page 162

3PAR InForm Management Console 4.1.0 User’s Guide

162

320-200231 Rev A

Configuring a Remote Copy over Fibre
Channel Port

To configure a Remote Copy over Fibre Channel (RCFC) port, access the Fibre Channel
Port Configuration wizard:

1. In the Manager Pane, click Systems.
2. In the Management Tree, select the system on which you wish to configure the port.
3. In the Common Actions Panel, click Configure FC Port.

The Fibre Channel Port Configuration wizard appears.

4. In the General group box:

a. System list - Select the system on which the port will be configured.
b. Port list - Select the port to be configured as a Fibre Channel port.

5. In the Settings group box:

a. Connection Mode list - Select the mode of the port as RCFC.

b. Connection Type list - Select whether the connection type is Loop or Point.
c. Unique Node WWN - Enable or disable the node WWN.

d. Configured Rate - Select Auto (default), 1 Gbps, 2 Gbps, or 4 Gbps.
e. VLUN Change Notification (VCN) - Enable or disable the VLUN change

notification.

f. Interrupt Coalesce - Enable or disable the interrupt coalesce.
g. Persona list - (For systems using InForm OS 2.2.4) Select the port persona.

6. Click OK.