HP 3PAR Operating System Software - Manual (Page 247)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 247
Step 2. Allocation Settings
1. From the Availability list, select Cage (default), Port, or Magazine.
2. From the Set Size list, select default, 32, 64, 128, 256, or 512 KiB. The default value
depends on raid type and device type used. If FC or NL drives are used, the step size
defaults to 256 KiB for RAID 0 and RAID 1, and 128 KiB for RAID 5. If SSD drives are
used, the step size defaults to 32 KiB for RAID 0 and RAID 1, and 64 KiB for RAID 5.
For RAID 6, the default is a function of the set size.
3. From the Preferred Chunklets list, select Fast (default) or Slow.
4. Click Next to use the Disk Filter (if enabled), or click Finish.
Step 3. Disk Filter
The Disk Filter displays the physical disks used. Pattern displays the parameters of the
disks used.
To modify the list of disks used:
1. Click the Filter icon.
2. See
Filtering for details.
3. Click Next to view summary information, or click Finish.
Step 4. Summary
Review the summary information and when satisfied, click Finish.
See also:
Manager Pane
Management Tree
Filtering
Editing a Common Provisioning Group
To edit a Common Provisioning Group (CPG):
1. Access the CPGs tab.
2. Right-click the CPG you wish to edit.
3. In the menu that appears, click Edit.
The Edit CPG wizard appears.