HP 3PAR Operating System Software - Manual (Page 110)

3PAR InForm Management Console 4.1.0 User’s Guide
110 320-200231 Rev A
Viewing the Drive Cage Interface Card
Details
To view interface card details:
1. Access the Drive Cages screen.
2. In the upper pane of the Drive Cages screen, click the Summary tab and then click a
drive cage.
3. In the lower pane, click the Interface Cards tab.
The Interface Cards tab appears as follows (the following image depicts information for a
DC4 drive cage. Your screen may differ depending on the drive cage type in your system):
The following information for DC2 and DC4 drive cages is provided:
Column Description
Name The interface card name.
Ports
Four ports for each FC-AL. For FC-AL A, that is A0 through A3, and for
FC-AL B, that is B0 through B3.
Link A RX
LED
The status of Link A's fibre channel receiver of the SFP. Green if
receiving signal; off if not receiving signal.
Link A TX
LED The status of Link A's SFP transmitter. Green if sending signal; off if not
sending signal.
Link B RX
LED The status of Link B's fibre channel receiver of the SFP. Green if
receiving signal; off if not receiving signal.
Link B TX
LED The status of Link B's SFP transmitter. Green if sending signal; off if not
sending signal.
System LED The system status.
Link A Speed Link A speed.