HP 3PAR Operating System Software - Manual (Page 314)

3PAR InForm Management Console 4.1.0 User’s Guide
314 320-200231 Rev A
The Edit VV Template wizard appears.
Step 1. General
1. In the Template group box:
a. (Optional) Description - Enter a template description.
b. (Optional) Click the Override Unincluded Properties checKiBox to allow users to
set non-default values for unincluded properties when applying the template.
2. In the User Space group box:
a. In the Include column on the left, check the appropriate boxes to include
properties in the template. The list of values for each property are listed in the
Defined Value column on the right. Include any properties for which you wish to
define specific values to be used by the template. Checking the Allow Override
checKiBox allow users to modify that property's value when applying the template.
b. Use the following table as a guide when choosing which properties to include in a
VV template, User Space group box:
Property Include in the template in order to...
Size
determine the size that the volume created with this template
presents to the host.
Provisioning
create a base volume template, select Fully Provisioned from
PDs.
Device Type
set the disk type, Fibre Channel (FC),Nearline (NL), or Solid State
(SSD).
Device Speed set the speed of the disk in K RPM.
Note: The Device Speed number does not represent a rotational speed for the drives
without spinning media (SSD). It is meant as a rough estimation of the performance
difference between the drive and the other drives in the system. For FC and NL drives, the
number corresponds to both a performance measure and actual rotational speed. For an
SSD drive, the number is to be treated as relative performance benchmark that takes into
account in I/O per second, bandwidth, and the access time.
RAID Type set the VV's RAID type.
Set Size set the VV's set size.
3. Click Next to enter copy space information, or click Finish.