HP 3PAR Operating System Software - Manual (Page 181)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 181
Viewing the Physical Disks Spares Tab
Note: In order to view the Spares tab, you must enable spares information in
preferences. See Setting Global Preferences .
To view the physical disks Spares tab:
1. Access the Physical Disks screen.
2. Click the Spares tab.
The Spares tab appears as follows:
The following information is displayed:
Column Description
PD ID
Physical disk ID, as assigned by the system. Physical disks are
numbered contiguously during system installation beginning with 0.
PD Chunklet
Chunklet ID, which indicates the location of the chunklet on the physical
disk. Chunklets are numbered contiguously beginning with 0
LD Name Name of the logical disk that is using the spare chunklet.
LD Chunklet The position of the chunklet in the logical disk.
State
State of the chunklet as identified by the kernel. See System and
Component Status Icons .
Usage
Indicates whether the chunklet is reserved by a logical disk or available
for use.