HP Matrix Operating Environment Software - Manual (Page 46)

NOTE: Typing zero (0) for both of these fields results in a minimum value of 0.0 EB and
maximum value of 9.2 EB.
Click the OK button to return to the New Goal window.
11. To create settings for a Presentation type, the Volume Presentation Constraint dialog box
displays:
NOTE: SPM v1.x supports Fibre Channel arrays only.
a. If you want to apply this constraint, select the Presented box; to save the information but
not apply it yet, leave the Presented box cleared.
b. Either leave the Logical Unit Number field set to Unspecified, or click the other radio button
and use the arrows in the Logical Unit Number field to select the LUN number for the
volume.
c. Make the appropriate selection from the list in the Host Mode field.
d. To add to the Initiators table, click the Add button. The new entry appears in the next
empty row.
e. Select the Type from the list in the Type column.
f. Enter the correct Port ID into the Port ID field.
The Port ID identifies the port to which this storage is presented on the server.
g. In the Network/SAN Connectivity field, select the appropriate option from the list.
h. When the Presentation Constraint information is correct, click the OK button to return to
the New Goal dialog box.
46 Managing storage catalog entities