beautypg.com

Using a bluetooth device, Emergency calls – Apple iPhone (For iOS 6.1) User Manual

Page 46

background image

Chapter 5

Phone

46

Using a Bluetooth device

For information about using a Bluetooth device, see the documentation that came with the
device. See

Pairing Bluetooth devices

on page 32.

Bypass your Bluetooth device:

Answer a call by tapping the iPhone screen.

During a call, tap Audio and choose iPhone or Speaker Phone.

Turn off Bluetooth in Settings > Bluetooth.

Turn off the Bluetooth device, or move out of range. You must be within about 30 feet
(10 meters) of a Bluetooth device for it to be connected to iPhone.

Emergency calls

Make an emergency call when iPhone is locked: On the Enter Passcode screen, tap
Emergency Call.

Important:

iPhone can be used to make an emergency call in many locations, provided

that cellular service is available, but it should not be relied on for emergencies. Some cellular
networks may not accept an emergency call from iPhone if iPhone is not activated, if iPhone
is not compatible with or configured to operate on a particular cellular network, or (when
applicable) if iPhone does not have a SIM card or if the SIM card is PIN-locked.

In the U.S., location information (if available) is provided to emergency service providers when
you dial 911.

With CDMA, when an emergency call ends, iPhone enters emergency call mode for a few minutes
to allow a call back from emergency services. During this time, data transmission and text
messages are blocked.
Exit emergency call mode (CDMA): Do one of the following:

Tap the back button.

Press the Sleep/Wake button or the Home button .

Use the keypad to dial a non-emergency number.

This manual is related to the following products: