KROHNE ALTOSONIC V EN - Manual (Page 9)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 9 of 106
2.3 Features
Data measured
RS485
UFC-V ↔ UFP-V (data communication connection between UFC-V and UFP-V):
Flow velocity -five times (as a percentage)
Transit time -five times
Status UFC-V -out of range, path failure, communication failure
Analog in Temperature : body, proces, densitometer*
Pressure : proces*, densitometer*
Density : proces*, standard*, densitometer*
Digital in Start /Stop signals calibration (KROHNE used), or switch Densitometer calibration data
Reset volumes and errors
Reset errors
Data processed for output to user
Flow : proces flow, standard flow*, mass flow*
Sound velocity : five channel values, mean value
Resetable Totals : proces volume, standard volume*, mass*. All forward, reverse, total.
Non resetable Totals : proces volume, standard volume*, mass*. All forward, reverse, total.
API Density : proces, standard*, densitometer*
Analog in Temperature : body, proces*, densitometer*
Analog in Pressure : proces*, densitometer*
Analog in Density : densitometer*, standard*
Flow weight averages : Temperature (body, proces*, Proving external*, standard*, densitometer*)
Pressure (proces*, densitometer*)
Density (proces*, standard*, densitometer*)
Corrections (Ctl & Cpl values*)
[2 sets averages (= made in two time intervals*)]
Batch ticket print : All output values can be printed by free definable layout configuration
Data integrity
Alarms on flow data
Alarms on system
Alarms on Low/High Analog inputs*
Data corrections under normal conditions
Reynolds correction
Body expansion correction for temperature and pressure
Standard volume correction according to API 2540* standard
Data corrections under alarm conditions
Real time profile correction on channel failure
On-line override values on analog inputs*
Filtering of measured data*
Service values on Modbus (measured by UFP but not used for calculation directly)
All temperatures, pressures, densities and Viscosity
* = Optional