KROHNE ALTOSONIC V EN - Manual (Page 71)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 71 of 106
6.10 During batch
During a batch the restrictions are handled as the installed BATCHING_ON level prescribes.
Files with all alarm times, totalisers, and batch averages are saved every 12 seconds to a SRAM disk
(or industrial compact flash with static and dynamic wear levelling) in dual files.
Sequentially saving it each time in a different file (file1 or file2). So when the power is turned of during a
file-save causing the file to be corrupted, the previously saved dual file is used at start-up to load
previously saved alarm times, totalisers, and batch averages.
6.10.1 Reading / Printing previous batch ticket
During a batch it is possible to read and print a previous batch ticket
From Main window to Batch Control window by F7 and then Function Key F2 for reading previous
batch ticket
Explanation Function keys:
F1 : Back to Main Window
F2 : Return to Batch Control window
F3 : Upload “Ticket to read “
F4…F7 : Change “Ticket to read” number within the limits of “Tickets available”