KROHNE ALTOSONIC V EN - Manual (Page 53)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 53 of 106
4.9.9 Service menu: F10 IO window
All secondary inputs and all outputs other then Modbus can be seen in this window
Under normal circumstances it is not necessary to view this window.
Input secondary signals
The signals for temperatures pressures densities and viscosity can be input by AD Card, Modbus or
Frequency Input.
The configuration of these signals is in the CLNT0300.dat file.
When setting up analog and digital I/O signals this window shows the signals for the AD card and
MP103 card of the UFP-V. Per card functions can be enabled / disabled card through off-line software
settings.
AD card configuration : see chapters DATA ACQUISITION and OUTPUT
MP103 card configuration : see chapters DATA ACQUISITION and OUTPUT