KROHNE ALTOSONIC V EN - Manual (Page 103)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 103 of 106
10.8 Window changes due to extended operations
This leads to some changes in the normal windows of the UFP
10.8.1 F1 Main Window changes due to extended operations
Above is the full operations Main Window.
Extra in this window is :
•
“Ext Flow Meter” conditions (T, P, D) under CONDITIONS
A separate temperature and pressure input are provided in the software under the name Temp
Proving and Pressure Proving. The density under the given temperature and pressure are
calculated is the density under standard conditions is available (through calculation or input)
• External Flow Meter: Flow, Totaliser, Error (deviation)%
There is a on-line continuous comparison between the master and the duty. The comparison is
controlled under F9 Controls, F3 Extern.
• Nett volume totalisers due to Base Sediment and Water % subtraction.