KROHNE ALTOSONIC V EN - Manual (Page 27)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 27 of 106
4.6 Main Menu: F6 Profile window
The Profile window shows the profile of the flow that in the measuring section of the flowmeter and is
therefore a good graphical display of the measured profile. Swirl or bend profiles can be easily
detected by this graph.
F6 : To change points of average (default over 4 measurements), control by F9 and F10
F9 : Up scaling for function F6
F10 : Down scaling for function F6, F7
A typical low Reynolds number profile is shown above. The blue surface is the noise band on the flow
measurement.
Note that anything that is done in this window by using function keys causes no interference with the
normal flow measurements.