GW Instek GSP-730 User Manual - Manual (Page 97)

REMOTE CONTROL
95
Parameter 1 Trace A
2 Trace B
3 Trace C
1 Clear and write mode
2 Peak hold mode
3 View mode
4 Blank mode
5 Minimum hold mode
Example meas:tra 1 1
Sets trace A to clear and write mode.
meas:tra:avg:on
Set
Description Turns the average function on and sets the number
of averages for the slected trace.
Syntax meas:tra:avg:on
Parameter 1 Trace A
2 Trace B
3 Trace C
4~20 Number of averages.
Example meas:tra:avg:on 1 4
Sets the number of averages used for Trace A to 4.
meas:tra:avg:off
Set
Description Turns the average function off for the slected trace.
Syntax meas:tra:avg:on
Parameter 1 Trace A
2 Trace B
3 Trace C
all All traces
Example meas:tra:avg:off all
Turns the average function off for all the traces.