GW Instek GSP-730 User Manual - Manual (Page 107)

APPENDIX
105
A
PPENDIX
GSP-730 Default Settings
The following default settings are the factory configuration settings
for the spectrum analyzer (Function settings/Test settings).
Frequency
Center Frequency: 1.5GHz Start Frequency: 0Hz
Stop Frequency: 3GHz CF Step: Auto
Span
Span: 3GHz
Amplitude
Reference level: -30.0dBm Scale Div: 10
Units: dBm
Autoset
Amp.Floor: Auto Span: Auto
Marker
Marker: Off
Peak Search
N/A
Meas
ACPR: Off OCBW: Off
Limit Line
H Limit: Off L Limit: Off
Pass/Fail: Off
BW
RBW: Auto
Trace
Trace: A: Clear&Write Average: Off
Display