GW Instek GSP-730 User Manual - Manual (Page 21)

GETTING STARTED
19
Software Update
Description The GSP-730 allows the software to be updated
by end-users. Before using the GSP-730, please
check the GW Instek website or ask your local
distributor for the latest software.
The update file, MAIN1.BIN, must be placed in
the root directory of a USB flash drive.
System version Before updating the software, please check the
software version.
1. Press
System
>Information[F4].
2. The system version is displayed on the
SW Ver[F4] icon.
Software version
Update software 1. Place the update file, MAIN1.BIN, into the root
directory of a USB flash drive.
2. Insert the USB flash drive into the USB port on
the front panel.
3. Press
System
>Update From USB Flash[F5].
4. Press Update Now[F3] to execute the update
process.
 When the message “Programmed Successful” is
displayed, the software has successfully completed
the update procedure.