beautypg.com

Activating a marker, Activate a normal marker, Ge 39 – GW Instek GSP-730 User Manual User Manual

Page 41

background image

BASIC OPERATION

39

Activating a Marker

There are two basic marker types, normal markers and delta
markers. Normal markers are used to measure the frequency/time
or amplitude of a point on the trace. Delta markers are used to
measure the difference between a reference point and a selected
point on the trace.

Activate a Normal Marker

Operation

1. Press

Marker

> Marker[F1] and select a marker

number.

Marker:

1~5

2. Press [F2] to turn the selected marker on.

3. Press Mode[F3] and set the marker mode to

Normal.

4. The display will show the marker on the trace

(centered by default) with the marker
measurement at the top of the display.

Maker No., Frequency, Amplitude

Marker

See also other documents in the category GW Instek Equipment: