GW Instek GSP-730 User Manual - Manual (Page 89)

REMOTE CONTROL
87
ts
Set
Description Resets the sweep and starts it once (i.e., sweeps
one time).
Example ts
Frequency Commands
meas:freq:cen ........................................................................... 87
meas:freq:st............................................................................... 87
meas:freq:stp ............................................................................ 88
meas:freq:cen
Set
Query
Description Sets or queries the center frequency.
Syntax meas:freq:cen
Query Syntax meas:freq:cen?
Parameter Center frequency.
Return parameter Returns the frequency and unit.
Example meas:freq:cen 100 khz
Sets the center frequency to 100kHz.
Query example Meas:freq:cen?
>100 kHz
meas:freq:st
Set
Query
Description Sets or queries the start frequency.
Syntax meas:freq:st
Query Syntax meas:freq:st?