GW Instek GSP-730 User Manual - Manual (Page 72)

GSP-730 User Manual
70
Operation 1. Press Display >Half-Upper[F4] or Half-Lower[F5]
or Alternate Sweep[F6] to enable the split
spectrum view.
 Turning Half-Upper on will automatically turn
Half-Lower off.
 Turning Half –Lower on will automatically turn
Half-Upper off .
 If Alternate Sweep is turned on, each sweep will
alternate, but only the upper sweep parameters can
be edited.
2. To return to a full-screen, single spectrum
display, press Full Display[F2].
Note
After exiting the split spectrum view, the analyzer
will use the settings from the active window. The
settings for the inactive screen will be retained for
the next time that split spectrum view is used.
If the spectrum analyzer was in the Alternate
mode, then the upper sweep settings will be
returned.