GW Instek GSP-730 User Manual - Manual (Page 48)

GSP-730 User Manual
46
Peak Search
The Peak Search key is used to find trace peaks. The currently
active marker is used in conjunction with the peak functions to
mark the peaks that are found. Peaks can be sorted by frequency or
amplitude in the peak table.
Move Marker to Peak
Description Move the active marker to the highest peak.
The highest peak can be either found once or
continuously.
Operation 1. Press
Marker
> Marker[F1] and select a marker
number.
2. Press Peak
Search
>Peak Search[F1]. The marker will
move to the highest signal peak.
3. To continually search for the peak each sweep,
press, Peak
Search
>More[F6]>Peak Track[F1] and set
Peak Track to ON.
Move Marker and Peak to Center
Description The Peak to Center function moves the marker to
the highest signal peak and moves the center
frequency to that peak.
Operation 1. Press
Marker
> Select Marker[F1] and select a
marker number.
2. Press Peak
Search
>Peak to Center[F5].
Note
The span will not be changed.