GW Instek GSP-730 User Manual - Manual (Page 65)

BASIC OPERATION
63
Peak Hold
Min Hold
The maximum or minimum
points are maintained for the
selected trace. The trace points
are updated each sweep if new
maximum or minimum points
are found.
View
View will hold the selected
trace and stop updating the
trace data for the selected trace.
Pressing View[F4] will display
the trace data that was cleared
using the Blank[F5] key.
Blank Clears the selected trace from
the display and stores trace
data. The trace data can be
restored by pressing View[F4].
Operation 1. Press Trace > Trace[F1] and choose a trace.
Trace: A, B, C
2. Select the trace type:
Clear & Write[F2]
Peak Hold[F3]
View[F4]
Blank[F5]
More[F6]>Min Hold[F1]
Note
Traces B and C are set to Blank by default.